How to install an Elge water filter at home

Here are the steps to install a simple Elge filter at your home: 1.

Remove any water that you think may have accumulated.

The easiest way to do this is to use a hose to collect water from your shower or tub.

For example, a 1,000-litre water filter might be a good idea if you have a shower or bathtub full of water.2.

Fill a large bucket with cold water and place the filter in the bottom.3.

Bring the bucket of water to a boil, then turn off the tap.4.

Pour the filtered water through the filter to remove excess water.5.

Put the filter back on and wait for the water to recirculate and return to a safe temperature.6.

The water will be a little thicker than normal water, but that’s normal.7.

Repeat steps 2 and 3 until you have 10 litres of filtered water.